Like a sushi conveyor belt but with line following robots and Thanksgiving dinner.
7

I hacked an N64 controller, so the player has to scream instead of pressing 'B'.
4

I turned Simone Giertz's car into a computer mouse by hacking a regular computer mouse.
3

How I built an animatronic beanie. I'm not sure what this thumbnail is even.
4

I unwrapped my face with a video camera and computer code.
7

Make an interactive Harry Potter wand out of literally anything.
12

Making a tentacle prop with pantyhose, latex, and a stuffed banana.

Just a quick post to dump some full res screen shots people are asking for.

Creating animations with an externally triggered stroboscope
2

How to make salsa with a garbage disposal
1

Can safety glasses be used as laser glasses?
1

There were bees living in my TV so I threw it off a cliff and built a better one with paper disks and a drill motor.
2

3D printing with ham, cheese, a laser cutter, and 'science gone too far'.
2

Hacking my CO2 laser cutter to engrave audio onto playable records.
2

An extremely violent toast buttering robot built from junk motors, laser cut wood, and zip ties.
4

Biohacking a dog with wieners, a laser cutter, and robotics.
2

How to build a net gun which shoots 20-30 feet!

You don't need a house to have a home... Here's a glorious, burnt, laser cut, gingerbread trailer.
2

In this experiment I melt beach sand into crummy, crumbly, 2 dimensional art.
9

I made a laser cut, Arduino powered, light up, Doctor Strange spell prop. That's a mouthful.
4

I built PumpkinBot and fought against a real BattleBot.
2

A 10 Watt LED, Arduino, nerd, and laser cutter's powers combined to form: Stroboscope!
2

I built an infrared speed sensor for my air cannon.

I designed and laser cut a weird little pull-string car.
4

I created a sweet wooden skateboard using SolidWorks and my homebrew laser cutter.
13

I built an inexpensive, PC based, wireless telemetry system using COSMOS and Arduino. This system measures 3-axis accelerations of a race car allowing engineers to verify and tune the suspension design.
5

CGI renders most of the effects in modern film, but still can't compete with a good practical effect. This build-log covers three Arduino powered spaceship props I built for my loosing submission to the 2016 Doritos Crash the Superbowl.

This build converted an external monitor to a wireless kinetic gimbal controller using: two Arduino Pro Minis, two nRF24L01+ modules, a Sparkfun 9DOF IMU, and an AlexMos brushless gimbal.
4

TL;DR ***This unit may have a wiring fault which is incredibly dangerous, potentially deadly, and a fire hazard.*** I was gifted a brand new "858D Hot Air Rework Station" being sold by "Kohree" on Amazon Prime. It is one of the highest rated on Amazon and was positively reviewed by Dave Jones on EEVblog. 858D SMD Rework Station
4

Finished Monitor I built an external DSLR camera monitor with a laser cutter, 3D printer, and Arduino Pro-Mini. It has 1280x800 pixel resolution, 5.5 hour battery life, and a built in IR remote to trigger photo and video capture on Canon cameras. Special thanks to Glenn Langton for access to a laser cutter. Here's his website: http://www.iconoglyph.com Here is a video overview: https://youtu.be/FhDdDiZii_Y
2
Loading